300 Series SandMask

The 300 Series is a highly durable, thin gauge resist for low pressure applications to attain shallow to medium sandblast depth. This product is easily cut whether by hand or by computer plotter, offering a cost effective alternative for projects where lighter blasting pressure is sufficient, such as glass, mirror, and foam. The 300 series comes with a regular grip adhesive for smooth or finished surfaces, utilizes a paper liner, and is available both punched and un-punched.  

Product Specifications:

Width: 15”, 20″, 25”, 30” and 60″ master roll
Roll Length: 20 Yards
PVC Thickness: 7.5 Mils of Vinyl
Adhesive Thickness: 2.5 Mils Waterbased Acrylic
Liner: Paper
Air Pressure Limits: Up to 50 PSI
Compatible Grits: Sand, Aluminium Oxide, Garnet, Silica Carbide, Glass Beads, others
Blade: 60°
Shelf Life: Up to 1 Year
Storage: Do not allow material to be exposed to direct sunlight for extended periods of time.

 

Specific Usage Information:

Regular Grip AdhesiveFor glass, plexiglass, mirror, foam and other smooth surfaces that can be blasted at a lower PSI to a shallow or medium depth.

S310S- 15”, 20”, 25”, 30” Friction Feed

S310SP- 15” & 30” Gerber Punched

S310SPI- 30” 1/2 Inch on center pin fed (special order only)